Temperature Transducer for screw-in mounting, with brass/screw-in immersion sleeve, with display, with changeover contact, 0-10 V or 4-20 mA

-30…+150°C
output 0-10 V, 4-20 mA
Pmax. 16 bar
16 measuring ranges per device
DIP-switch-technology
optional with LCD-Display
protection type IP65
hinge lock technology

The EM/E screwable transducer registers the temperature at a maximum pressure of 16 bar in gaseous and liquid media and converts this measured value into a linear output signal 0-10 V respectively. 4-20 mA.As an option the temperature transducer has two potential-free changeover contacts and a backlit display. The display content can be rotated in 90° steps using a menu and the measured value, the switching threshold set, the state of the respective relay, the MIN/MAX measured values for the selected intervals(1 h / 6 h / 12 h / 24 h) etc. can be read out.On the display version the user can, via the menu, specify an individual temperature range.Using the immersion sleeve, included in the scope of delivery, the temperature sensor is screwed directly into the container or the pipeline and can during service be quickly and easily replaced.

Measurement range temp.:	-30…+150°C
Measurement range configuration:	1 freely programmable measuring range via the menu input in the display (span min. 25K)
Scales:	-50…0°C, -50…+50°C, -50…+150°C, -30…+20°C, -30…+70°C, -20…+50°C, -20…+80°C, -20…+120°C, -20…+150°C, -10…+15°C, 0…+50°C, 0…+100°C, 0…+150°C, 0…+200°C, 0…+250°C, +10…+35°C
Accuracy:	±0,2 K + max. ±1,5% Span
Supply voltage analog 0-10 V:	24 V AC/DC (±5%)
Supply voltage analog 4-20 mA:	15…36 V DC, depends on liability (Ubmin = 15 V + Rload*0,02A)
Current consumption at 0-10 V:	typ. 10 mA, 30 mA peak current consumption for 50 ms at switching moment at option relay
Current consumption at 4-20 mA:	max. 20 mA / output, 40 mA peak current consumption for 50 ms at switching moment at option relay
Analogue output 0-10 V:	3-wire connection, min. load resistance 100 kOhm
Analogue output 4-20 mA:	2-wire connection (transmitter), max. RLoad(Ohm) = (+Ub – 15 V) / 0,02 A
Alarm output:	2 x potential-free change-over contact, 48 V, 1 A
Switching Hysteresis Relay:	Temperature: 2K (without display), 0,5…5K adjustable (with display)
Electrical connection:	screw terminals max. 1,5 mm²
Display:	optional LCD display with backlight on/off/auto
Material:	Protection sleeve: stainless steel VA 1.4571, Immersion sleeve: brass nickel-plated, Pmax. 16 bar
Cable gland:	PG11 high-strength cable gland with strain relief
Housing:	Polycarbonate PC UL 94 V0 with hinge locks, color signal white similar to RAL 9003
Dimensions:	Housing: L 89 x W 80 x H 47 mm, Protection sleeve: Ø 6 mm, Immersion sleeve: outside Ø 8 mm / inside Ø 6,5 mm, thread R1/2 inch
Protection type:	IP65
Protection class:	III
Working range r.H.:	0…98% r.H. in contaminant-free, non-condensing air
Working temperature:	Probe: -30…+150°C, Electronic: -20…+70°C
Storage temperature:	-20…+70°C
Installation:	immersion sleeve with R1/2 inch screw-in thread
Approvals:	CE, EAC, RoHS

Produktdetails