Produktdetails

Temperature Transducer for flush mounting, 0-10 V or 4-20 mA

Ursprünglicher Preis war: 157,92 €Aktueller Preis ist: 39,48 €.

SKU SK0120698-U Category Tag

24-Stunden-Versandgarantie

Bis zu 30 Tage für Rücksendungen

  • 0…+50°C
  • output 0-10V, 4-20 mA
  • GIRA standard 55

  • The UM1/E flush-mounted temperature transducer registers the temperature via the sensor in the housing and converts this measured value into a linear output signal 0-10 V respectively 4-20 mA. The room temperature transducer is, e.g. in offices or flats, fitted to the flush-mounted socket and is available in all common switching programmes. In the event of a deviation from the reference temperature the fine calibration can be performed directly on the device.

    Measurement range temp.: 0…+50°C
    Scales: -50…0°C, -50…+50°C, -50…+150°C, -30…+20°C, -30…+70°C, -20…+50°C, -20…+80°C, -20…+120°C, -20…+150°C, -10…+15°C, 0…+50°C, 0…+100°C, 0…+150°C, 0…+200°C, 0…+250°C, +10…+35°C
    Accuracy: ±0,2 K + max. ±1,5% Span
    Supply voltage analog 0-10 V: 24 V AC/DC (±5%)
    Supply voltage analog 4-20 mA: 15…36 V DC, depends on liability (Ubmin = 15 V + Rload*0,02A)
    Current consumption at 0-10 V: typ. 10 mA
    Current consumption at 4-20 mA: max. 20 mA / output
    Analogue output 0-10 V: 3-wire connection, min. load resistance 100 kOhm
    Analogue output 4-20 mA: 2-wire connection (transmitter), max. RLoad(Ohm) = (+Ub – 15 V) / 0,02 A
    Electrical connection: push terminals max. 1,5 mm²
    Light switch program: Busch Jäger (BJ), Gira (G), Jung (J), Berker (B), Merten (M)
    Protection type: IP20
    Protection class: III
    Working range r.H.: 0…98% r.H. in contaminant-free, non-condensing air
    Working temperature: Electronic: -20…+70°C
    Storage temperature: -20…+70°C
    Installation: onto in-wall junction box, diameter 55 mm
    Approvals: CE, EAC, RoHS