The motion sensor BFR/A registers movements over a scope 360° with a coverage of approx. 10 m using infrared sensors and, in the event of a movement, switches a changeover contact. The retention time can be freely set between 5 seconds and 15 minutes using a 270° potentiometer. The room housing in modern design is specially designed for indoor use. The motion sensor is optimally suited for motion dependent control processes, such as e.g. temperature or light control in offices.
Measuring principle: | alteration of position from persons and subjects with an temperature difference of > 3 K to the sensor |
Measurement range motion: | motion yes/no, apex angle 90°/110° on 360° range, reach 10 m |
Sensor: | infrared motion sensor |
Response time (t90): | < 1 s |
Sensor protection: | mounted inside housing |
Supply voltage: | 24 V AC/DC (±5%) |
Current consumption: | max. 20 mA at 24 V DC |
Alarm output: | 1 x potential-free change-over contact, 48 V, 1 A |
Electrical connection: | screw terminals max. 1,5 mm² |
Holding time: | adjustable from 5 sec. up to 15 min. by 270° potentiometer |
Cable gland: | on the back or housing side (predetermined breaking point) |
Housing: | ABS polyman, colour signal white like RAL 9003 |
Dimensions: | Housing: L 82 x W 82 x H 25 mm |
Protection type: | IP30 |
Protection class: | III |
Working range r.H.: | 0…98% r.H. in contaminant-free, non-condensing air |
Working temperature: | 0…+50°C |
Storage temperature: | -20…+50°C |
Installation: | on-wall or on flush-mounted box |
Approvals: | CE, EAC, RoHS |