Temperature Transducer for surface mounting, 0-10 V or 4-20 mA

-20…+70°C
EMC cable gland
output 0-10 V, 4-20 mA
16 measuring ranges per device
DIP-switch-technology
optional with LCD-Display
protection type IP65

The AM5/E outside transducer registers the temperature via the sensor inside the shock resistant, moisture proof aluminium die-cast housing and converts this measured value into a linear output signal 0-10 V respectively 4-20 mA. The aluminium housing ensures an extremely high mechanical robustness and has an EMS thread for the easy and safe EMC conform wiring. In weather dependent areas the temperature transducer is, for example, fitted to outside walls, whereby direct sunlight is to be avoided.

Measurement range temp.:	-20…+70°C
Scales:	-50…0°C, -50…+50°C, -50…+150°C, -30…+20°C, -30…+70°C, -20…+50°C, -20…+80°C, -20…+120°C, -20…+150°C, -10…+15°C, 0…+50°C, 0…+100°C, 0…+150°C, 0…+200°C, 0…+250°C, +10…+35°C
Accuracy:	±0,2 K + max. ±1,5% Span
Supply voltage analog 0-10 V:	24 V AC/DC (±5%)
Supply voltage analog 4-20 mA:	15…36 V DC, depends on liability (Ubmin = 15 V + Rload*0,02A)
Current consumption at 0-10 V:	typ. 10 mA
Current consumption at 4-20 mA:	max. 20 mA / output
Analogue output 0-10 V:	3-wire connection, min. load resistance 100 kOhm
Analogue output 4-20 mA:	2-wire connection (transmitter), max. RLoad(Ohm) = (+Ub – 15 V) / 0,02 A
Switching Hysteresis Relay:	2K
Electrical connection:	screw terminals max. 1,5 mm²
Display:	optional LCD-Display, to display the measured values on location ( with transparent plastic cover, no EMC protection)
Cable gland:	M16x1,5 high-strength cable gland with strain relief and EMC grounding
Housing:	die-cast (aluminium), colour silver grey like RAL 7001
Dimensions:	Housing: L 64 x W 58 x H 34,5 mm
Protection type:	IP65
Protection class:	III
Working range r.H.:	0…98% r.H. in contaminant-free, non-condensing air
Working temperature:	Electronic: -20…+70°C
Storage temperature:	-20…+70°C
Installation:	screw fastening
Approvals:	CE, EAC, RoHS

Produktdetails